Services

Sheet to surface

STEELX is a stainless steel surface workshop. Coating, cutting, forming and finishing are carried out in-house, so a single sheet can move from mill finish to installed architectural surface without leaving our control.

Stainless steel sheets loaded into a PVD vacuum chamberLaser-cut perforated stainless steel screenV-grooved stainless steel sheet being foldedMacro view of etched and embossed stainless steel textureStainless steel sheet being mirror polishedInstallation of stainless steel cladding panels on site

01 — PVD Coating

Physical Vapour Deposition bonds a titanium-based film to stainless steel inside a vacuum chamber. The colour is metallurgical, not painted — it cannot peel, and it holds its tone under UV, salt air and daily contact.

Chamber
2500 × 1500 mm
Film
0.3 – 1.0 µm
Standard
ASTM B117 · RoHS
Stainless steel sheets loaded into a PVD vacuum chamber

01

PVD Coating

Physical Vapour Deposition bonds a titanium-based film to stainless steel inside a vacuum chamber. The colour is metallurgical, not painted — it cannot peel, and it holds its tone under UV, salt air and daily contact.

Laser-cut perforated stainless steel screen

02

Laser Cutting

Fibre optics cut a clean, oxide-free edge in stainless up to 12 mm. Perforated screens, jali patterns and bespoke panel geometry are cut from drawing files with no tooling cost and no distortion at the edge.

V-grooved stainless steel sheet being folded

03

V-Grooving & Forming

A V-groove removes material from the reverse face so the sheet folds to a true 90° arris with no visible radius. Grooving, braking and rolling let a flat surface become a column cladding, a reveal or a box section without a weld line on show.

Macro view of etched and embossed stainless steel texture

04

Etching & Embossing

Masked chemical etching produces matte pattern against mirror ground; rolled embossing gives relief with real depth. Both can be run before PVD so the colour follows the texture rather than sitting on top of it.

Stainless steel sheet being mirror polished

05

Mirror & Hairline Finishing

Every surface is ground and polished in stages, each one removing the marks of the last. The final pass decides how the metal holds light — a hairline that reads as fabric at distance, or a mirror that dissolves into its reflection.

Installation of stainless steel cladding panels on site

06

Fabrication & Installation

Drawings are developed with the architect, panels are jigged and welded in the workshop, and the same team sets out and installs on site. Sequence, tolerance and joint alignment are resolved before anything is coated.

Colour, deposited atom by atom

Argon plasma strikes a titanium target; the vapour condenses onto the steel in a film thinner than a fingerprint. The tone is set by the gas, not by pigment.

Finished sheet under inspection light
PVD stainless facade at night
In-house stages
Six
Sheet capacity
3050 mm
Finish warranty
10 years

Send us a drawing, or a sheet.

Request a sample or quote