Retail · Lower Parel, Mumbai · 2024 · Completed

High Street Phoenix Canopy, Lower Parel

Water ripple PVD ss-304 canopy at High Street Phoenix, Lower Parel — casting dynamic, shifting light patterns on the pavement that change with the sun’s position, enhancing retail experience without glare.

Project facts

Client
Phoenix Mills
Location
Lower Parel, Mumbai, Maharashtra
Area
4,500 sq ft
Year
2024
Status
Completed
Scope
Retail canopy metalwork, supporting columns
Finish
Water ripple PVD (ss-304)
Services
Facade metal, Custom fabrication, Installation

Introduction

The brief

Phoenix Mills wanted a High Street Phoenix canopy that does more than just shade — it needs to create an experience. The brief: “Make walking from the mall to the street feel special, not transitional.” We proposed ss-pvd-304 with water ripple texture — not as a decorative film, but as structural metal bent into 3D ripples before coating. This turns sunlight into moving, organic patterns on the pavement below (like light through water), while the texture inherently diffuses glare — critical for Mumbai’s intense retail-hour sun.

Approach

How it was built

We modeled sun-path dynamics for Lower Parel (specific to the canopy’s east-west orientation) to determine ripple depth/pitch for optimal pavement patterning. The water ripple isn’t surface-applied — it’s ss-pvd-304 laser-cut into strips, then bent into 3D waves (50mm peak-to-trough) before PVD coating. This means: the texture wears with the metal (no peeling during monsoons); light diffusion is inherent to the shape (no coating failure risk); and edges are smooth, rounded radii (no sharp corners to trap dirt or corrode).

The ss-pvd-304 substrate was selected for Lower Parel’s urban exposure (moderate salt, high pollution). We rejected painted or anodized alternatives — they’d require repainting every 18 months in this high-traffic zone.

Underside of High Street Phoenix canopy, Lower Parel — showing ss-pvd-304 bent into structural water ripple shape before PVD coating (texture is metal-formed, not surface-applied) for monsoon durability.
SS-pvd-304 water ripple PVD coupon after 1,000-cycle ASTM D4060 abrasion test — zero texture loss or coating wear, confirming structural durability for High Street Phoenix canopy, Lower Parel.

Material & surface

The finish story

Grade ss-pvd-304 (chosen for balance of cost, formability, and urban corrosion resistance). Hairline-prepped to Ra 0.8μm, then water ripple PVD coated — but critically, the ripple shape was formed in the ss-304 before coating. The PVD coating itself is a clear protective topcoat (CrN-based, 0.8μm) over the bronze-tinted base layer — this is why we call it “water ripple PVD”: the texture creates the effect, the PVD just seals and tints it.

We validated with: ASTM D4060 abrasion — 1,000 cycles CS-10 wheels with zero texture loss; ASTM D4587 UV — 1,200 hours with ΔE < 0.8; and a 6-month Rajkot monsoon simulation with zero staining in the ripple valleys.

Gallery

Project gallery

04 images — click to enlarge

Drag / scroll

Outcome

What was delivered

After two Lower Parel monsoons: the canopy shows zero staining in ripple valleys — the texture actually helps water sheet off (unlike flat surfaces that trap dirt). The light patterns on the pavement remain crisp and dynamic — no fading or blurring. Maintenance: bi-annual water rinse (no scrubbing — the texture hides minor dust). We ran ss-pvd-304 water ripple PVD through 1,200 hours ASTM B117 salt fog — zero red rust; 1,200 hours ASTM D4587 UV — ΔE < 0.8; and ISO 11998 Class 1 cleanability — water-only wipe restores 98% of original light pattern. Critically, the canopy reduces pavement glare by 65% (measured via luminance meter) — making the walk from mall to street comfortable even at 12 PM in May. Phoenix Mills reports a 22% increase in dwell time in the canopy zone vs. adjacent uncovered walkways.

Floors
Ground (canopy only)
Envelope
Water ripple PVD fins (ss-pvd-304)
Special
Supporting columns: Same water ripple PVD ss-304
Completion
2024

Technical

Specification

Substrate
SS 304, 1.5 mm (canopy panels), 2.0 mm (columns)
Surface prep
Hairline No.4 (Ra 0.8μm)
PVD Coating
Canopy/Columns: Water ripple PVD (ss-pvd-304, structural texture + CrN-based clear topcoat over bronze base)
Texture formed by bending ss-304 before any coating
Climate Proofing for Lower Parel, Mumbai
Salt fog resistance: ASTM B117, 1,200 hours (no red rust — urban, moderate salt)
UV stability: ASTM D4587, 1,200 hours (ΔE < 0.8)
Humidity: 90% RH tested (no blistering in valleys)
Cleanability: ISO 11998 Class 1 (water-only cleaning — texture hides fingerprints)

Start a project

Bring us the detail.

Send us the drawings, the finish you have in mind, or just a photograph of a surface you like. We will come back with samples.

Start a project