PVD vacuum chamber during a coating run

Process

FROM IDEA
TO SURFACE.

Interactive process

Seven stages

01

Brief

We take the architecture, the interior intent, the finish requirement, the scale and the performance expectation before anything is drawn.

02

Design

Modules, joints, returns and grain direction are resolved against the real panel and chamber limits, so nothing is redrawn after tender.

03

Material

Grade, thickness, surface and backing are selected for the environment — 304 inland, 316 coastal, honeycomb-backed at large format.

04

Prototype

A full-size coated sample is produced and viewed under the project lighting. Nothing goes to production before it is signed.

05

PVD

Panels are cleaned and coated in vacuum, batched by elevation so any drift stays outside the visible field.

06

Quality

Adhesion, thickness and colour are checked against the control sample; rejected panels return to preparation, not to coating.

07

Installation

Crated in installation sequence with film intact, fitted by our own crews, film removed after the last wet trade.

Stage detail

What each stage produces

Sheet stock in the workshop

01

Brief

We take the architecture, the interior intent, the finish requirement, the scale and the performance expectation before anything is drawn.

  • Scope note
  • Budget band
  • Programme outline
Metal surface detail

02

Design

Modules, joints, returns and grain direction are resolved against the real panel and chamber limits, so nothing is redrawn after tender.

  • Shop drawings
  • Module strategy
  • Joint detail
Raw stainless steel surface

03

Material

Grade, thickness, surface and backing are selected for the environment — 304 inland, 316 coastal, honeycomb-backed at large format.

  • Grade selection
  • Surface spec
  • Backing system
Prototype panel being finished

04

Prototype

A full-size coated sample is produced and viewed under the project lighting. Nothing goes to production before it is signed.

  • Coated sample
  • Signed control sample
PVD vacuum chamber

05

PVD

Panels are cleaned and coated in vacuum, batched by elevation so any drift stays outside the visible field.

  • Batch record
  • Colour verification
Quality inspection station

06

Quality

Adhesion, thickness and colour are checked against the control sample; rejected panels return to preparation, not to coating.

  • Adhesion test
  • Thickness log
  • Release note
Installation of coated panels

07

Installation

Crated in installation sequence with film intact, fitted by our own crews, film removed after the last wet trade.

  • Sequenced crating
  • Site survey
  • Handover pack

Material test

Choose a finish

Select a tone to preview it. Swatches are rendered material references — signed physical samples are always produced before a project colour is locked.

Champagne

Warm neutral

The most specified tone in hospitality — warm without reading as gold.

Before / after

What PVD actually does

Drag the divider: the same brushed stainless surface, before and after a champagne PVD layer measured in microns.

Raw brushed stainless steel
Champagne PVD coated stainless steelPVD finished
Raw stainless

Machinery

The line, stage by stage

Preparation

Preparation

Grinding, brushing and blasting to the specified texture.

Polishing

Polishing

Welded assemblies brought to one continuous surface.

Cleaning

Cleaning

Ultrasonic and solvent cleaning before the chamber.

Vacuum

Vacuum

Chamber evacuated to working vacuum with panels racked.

Deposition

Deposition

Ionised metal condenses onto the panel with reactive gas.

Inspection

Inspection

Colour, thickness and adhesion verified before release.

Installation

Installation

Sequenced fitting by our own installation teams.

Drag / scroll
Installed coated metal surfaces in a completed lobby