
Textured stainless steel
Embossed Stainless Steel Sheets
Depth you can read.
A stainless-steel surface rolled into a repeating three-dimensional relief, so the pattern is formed in the metal itself and shadow becomes part of the architecture.

Panel detail — natural silver
Pattern
pressed into
the metal.
Embossed sheets are formed between patterned rollers, lifting the surface into a repeating relief. Unlike printed or etched pattern, the geometry is physical — it casts real shadow and changes with the position of the light.

Real depth.
Real shadow.
01
Physical depth
The pattern is formed into the steel between rollers. It is geometry, not print, so it casts real shadow and changes as light moves across the panel.
02
Forgiving surface
Relief scatters reflection, so handling marks and everyday contact read far less than on a flat or polished sheet.
03
Pattern as identity
Scale and repeat can be selected against a project reference, giving an interior a texture that belongs to it alone.
Up close.
At macro scale the relief reads as facets — bright faces, dark recesses, and a clean line where the two meet.

Choose the repeat.
Pattern sets the scale of the surface. The same colour reads very differently across a tight grid and a flowing wave.




Medium relief
A regular diagonal repeat. Reads as an even field at distance and resolves into geometry up close.
Pattern, repeat and depth are confirmed against a sample. Availability depends on grade, thickness and sheet format.
The same panel, three lights
Light writes the pattern.



Under even daylight the relief reads quietly — a texture you notice at close range rather than across the room.
Where it is used
Surfaces people stand next to.







Colour over relief.
PVD colour is applied after forming, so the pattern stays visible through the tone.

Silver
Uncoated stainless
The relief carries the whole effect — light and shadow only, no colour shift.

Gold
PVD colour
Warm and reflective. Raised areas catch light while the recesses stay deep.

Rose Gold
PVD colour
A softer pink-copper tone that keeps the pattern legible under warm light.

Bronze
PVD colour
Deep and warm. The strongest reading of shadow across the relief.

Black
PVD colour
Graphic and contemporary. The pattern reads as light on dark rather than as colour.
PVD colour, pattern, grade and thickness are confirmed together at enquiry stage. Not every combination is available on every grade or format.
The material, at full scale.

Panels are set out sheet by sheet so the repeat lands where it should on the elevation. Sizes, thickness and pattern depth are confirmed together for each project.
Specification

- Material
- Stainless steel
- Grade
- SS304, SS316 — other grades available on request
- Surface finish
- Embossed (rolled three-dimensional relief)
- Pattern
- Diamond, linear rib, square grid, wave — custom on request
- Relief depth
- Available on request
- Colour
- Silver, Gold, Rose Gold, Bronze, Black
- PVD
- Available on coloured options
- Thickness
- Available according to grade, pattern and application
- Sheet size
- 4 × 8 ft, 4 × 10 ft, 5 × 10 ft, custom — typical formats
- Width
- Available on request
- Length
- Available on request
- Surface protection
- Protective film; anti-fingerprint on request
- Processing
- Cutting, bending, grooving, welding, edge finishing — on request
- Customisation
- Available on request
From roller to wall.
01
Roll
The flat sheet passes between patterned rollers, which form the relief into the steel.
02
Colour
PVD colour is applied over the formed surface, so the pattern stays visible through the tone.
03
Cut
Sheets cut to panel sizes with the pattern repeat set out across the elevation.
04
Bend
Press braking to returns and corners; the relief continues around the fold.
05
Install
Delivered with panel sequence identified so the repeat aligns on site.
Processing availability depends on grade, thickness, pattern depth and project requirements.
Two ways to hold light.

Flat finishes
- Reflection carries the surface
- Marks show readily
- Reads as a plane
- Light bounces off

Embossed
- Shadow carries the surface
- Marks are broken up
- Reads as a texture
- Light is held and released
Keep the depth clean.
- Wipe with a soft microfiber cloth and a non-abrasive stainless steel cleaner.
- Work with the pattern, not across it, so cleaner does not sit in the recesses.
- Dry the surface after cleaning to avoid marking in the deeper areas of the relief.
- Avoid steel wool, abrasive pads and harsh abrasive cleaners.
Other finishes
Imagery is shown as application reference to illustrate the finish in context. Pattern, colour, grade, thickness and format are confirmed against a physical sample before order.

Specify with confidence
See the depth in your own light.
Questions
FREQUENTLY ASKED.
Embossed stainless steel is formed between patterned rollers, which lift the surface into a repeating three-dimensional relief. The geometry is physical, so it casts real shadow and changes with the light.
Embossing forms the sheet mechanically, so the pattern has physical depth on both faces. Etching removes material chemically to create a pattern that is largely visual rather than raised.
Diamond, linear rib, square grid and wave are typical. Custom patterns can be developed against a project reference, subject to tooling and production.
Yes. PVD colour is applied over the formed surface, so the relief remains visible through the colour.
Silver (uncoated), Gold, Rose Gold, Bronze and Black. Availability of a specific colour against a specific pattern, grade and thickness is confirmed at enquiry stage.
SS304 and SS316 are the standard grades. Other grades are available on request.
Thickness is available according to grade, pattern and application. We confirm the options for your project on enquiry.
4 × 8 ft, 4 × 10 ft and 5 × 10 ft are typical formats, and custom sizes are available. Formats are confirmed per order.
Yes. Cutting, bending and V-grooving are available on request. Suitability depends on grade, thickness, pattern depth and the detail required.
Repeat alignment across adjacent panels is set out at drawing stage and identified on delivery. Tell us the elevation and we will plan the sequence with you.
Less than flat or mirror surfaces, because the relief scatters reflection. Marks can still show on dark PVD colours, and anti-fingerprint treatment is available on request.
Use a soft microfiber cloth with a suitable non-abrasive stainless steel cleaner, working with the pattern and drying afterwards. Avoid steel wool and abrasive pads.
Yes. Request a physical sample so the pattern depth, colour and light interaction can be assessed on site before specification.
SPECIFY YOUR SURFACE.
Send us the finish, colour and quantity you are working towards — drawings welcome — and we will come back with a project quote.



